Blow molding machine
You are here: Home > Product > Blow molding machine > Storag type blow molding machine >
KSA100-120L medium storage blow moulding machine Time:2019-06-05 16:11
KSA100-120L stored-type blow molding machine
KSA100-120L storage blow molding machine technical characteristics
KSA100-120L material storage blow molding machine PLC plus man-machine interface, touch operation.Fault alarm self-diagnosis, clear at a glance.
The center of the bottle blowing machine USES the feeding die head, which can completely eliminate the confluence line of the products and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
Medium storage type blow molding machine adopts high speed, high efficiency and low energy consumption plasticizing system.

Technical parameters of KSA100-120L medium storage blow moulding machine UNIT KSA100-120L
Maximum product volume L 90
Empty circulation PCS/H 360
Bottle Blower Screw Diameter MM 100
Ratio of length to diameter of screw L/D 25
Screw motor power KW 45
Screw heating power KW 24
Number of screw heating sections of hollow blow moulding machine ZONE 4
Extrusion volume of HDPE KG/H 180
Oil pump motor power KW 22
Clamping force KN 400
Mould opening and closing stroke MM 550-1250
Template size W x H(MM) 1000x 1350
Maximum die diameter MM 430
Storage capacity L 12
Die Heating Power KW 20
Number of heating sections ZONE 4
Blowing pressure MPA 0.8
Gas dosage of blow moulding machine M3/MIN 1.2
Cooling water pressure MPA 0.3
Water consumption L/MIN 100
Machine outline size L x W x H(M) 5.5x 2.8x 4.5
Machine weight TON                  14.5

Copyright:Zhangjiagang kaisu machinery co., ltd.