KSA120-220L storage extrusion blow molding machine
KSA120-220L Technical characteristics of storage type extrusion blow molding machine
Blow molding machine PLC plus man - machine interface, touch operation.Fault alarm self-diagnosis, clear at a glance.
Center feed die, eliminate the confluence line completely, and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
The high speed, high efficiency and low energy consumption plasticizing system is used in the large extrusion blow molding machine.

Technical parameters of KSA120-220L large storage extrusion blow moulding machine	UNIT	YJA120-220L
Maximum product volume	L	220L
Empty circulation	PCS/H	280
Screw diameter	MM	120
Screw Length-Diameter Ratio of Blow Molding Machine	L/D	30
Screw motor power	KW	110
Screw heating power	KW	36
Number of screw heating sections	ZONE	6
Extrusion volume of HDPE	KG/H	350
Oil pump motor power	KW	22
Clamping force	KN	900
Mould opening and closing stroke	MM	700-1600
Formwork size of large blow moulding machine	W x H(MM)	1400x 1650
Storage capacity	L	25
Maximum die diameter	MM	580
Die Heating Power	KW	30
Number of heating sections	ZONE	6
Blowing pressure	MPA	0.8
Gas consumption	M3/MIN	1.8
Cooling Water Pressure of Bottle Blower	MPA	0.3
Water consumption	L/MIN	220
Machine outline size	L x W x H(M)	6.0 x 3.2 x 5.0
Machine weight	TON	32