Blow molding machine
You are here: Home > Product > Blow molding machine > Storag type blow molding machine >
KSA90-60L Hollow Blow Molding Machine Time:2019-06-05 17:18
KSA90-60 Hollow blow molding machine technical characteristics

Hollow blow molding machine PLC plus man - machine interface, touch operation.Fault alarm self-diagnosis, clear at a glance.
Center feed die, eliminate the confluence line completely, and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
The high speed, high efficiency and low energy consumption plasticizing system is used in the blow molding machine
Technical parameters of KSA90-60L hollow blow moulding machine UNIT KSA90-60L
Maximum product volume L 60
Empty circulation PCS/H 500
Screw diameter MM 90
Ratio of length to diameter of screw L/D 25
Screw motor power KW 37
Bottle Blower Screw Heating Power KW 21
Number of screw heating sections ZONE 4
Extrusion volume of HDPE KG/H 140
Oil pump motor power KW 18.5
Clamping force KN 350
Mould opening and closing stroke MM 500-1200
Blow Molding Machine Template Size W x H(MM) 700x 1200
Maximum die diameter MM 350
Storage capacity L 6.6
Die Heating Power KW 17
Number of heating sections ZONE 4
Blowing pressure MPA 0.8
Gas consumption M3/MIN 0.8
Cooling water pressure MPA 0.3
Water consumption of hollow blow moulding machine L/MIN 85
Machine outline size L x W x H(M) 5.3 x 2.4x 3.8
Machine weight TON 13.2

上一篇:没有了 下一篇:KSA120-500L Hollow Blow Molding Machine

Copyright:Zhangjiagang kaisu machinery co., ltd.