KSA120-220L Large Blow Molding Machine
Time:2019-06-05 17:21
Large blow moulding machine PLC plus man-machine interface, touch operation. Fault alarm self-diagnosis, clear at a glance.
Center feed die, eliminate the confluence line completely, and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
The high speed, high efficiency and low energy consumption plasticizing system is used in the blow molding machine.
Technical Characteristics of KSA120-220L Large Blow Molding Machine
Large blow moulding machine PLC plus man-machine interface, touch operation. Fault alarm self-diagnosis, clear at a glance.
Center feed die, eliminate the confluence line completely, and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
The high speed, high efficiency and low energy consumption plasticizing system is used in the blow molding machine.
Technical parameter | UNIT | KSA120-220L |
Maximum product volume | L | 220 |
Empty circulation | PCS/H | 280 |
Screw diameter | MM | 120 |
Screw Length-Diameter Ratio of Blow Molding Machine | L/D | 30 |
Screw motor power | KW | 110 |
Screw heating power | KW | 36 |
Number of screw heating sections | ZONE | 6 |
Extrusion volume of HDPE | KG/H | 350 |
Oil pump motor power | KW | 45 |
Clamping force | KN | 900 |
Mould opening and closing stroke | MM | 700-1600 |
Bottle Blower Template Size | W x H(MM) | 1400x 1650 |
Maximum die diameter | MM | 580 |
Storage capacity | L | 30 |
Die Heating Power | KW | 30 |
Number of heating sections | ZONE | 6 |
Blowing pressure | MPA | 0.8 |
Gas consumption | M3/MIN | 1.8 |
Cooling Water Pressure of Large Blow Molding Machine | MPA | 0.3 |
Water consumption | L/MIN | 220 |
Machine outline size | L x W x H(M) | 6.0x 3.2x 5.0 |
Machine weight | TON | 32 |
Copyright:Zhangjiagang kaisu machinery co., ltd.