KSA100-120L stored-type blow molding machine
KSA100-120L storage blow molding machine technical characteristics
KSA100-120L material storage blow molding machine PLC plus man-machine interface, touch operation.Fault alarm self-diagnosis, clear at a glance.
The center of the bottle blowing machine USES the feeding die head, which can completely eliminate the confluence line of the products and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
Medium storage type blow molding machine adopts high speed, high efficiency and low energy consumption plasticizing system.

Technical parameters of KSA100-120L medium storage blow moulding machine	UNIT	KSA100-120L
Maximum product volume	L	90
Empty circulation	PCS/H	360
Bottle Blower Screw Diameter	MM	100
Ratio of length to diameter of screw	L/D	25
Screw motor power	KW	45
Screw heating power	KW	24
Number of screw heating sections of hollow blow moulding machine	ZONE	4
Extrusion volume of HDPE	KG/H	180
Oil pump motor power	KW	22
Clamping force	KN	400
Mould opening and closing stroke	MM	550-1250
Template size	W x H(MM)	1000x 1350
Maximum die diameter	MM	430
Storage capacity	L	12
Die Heating Power	KW	20
Number of heating sections	ZONE	4
Blowing pressure	MPA	0.8
Gas dosage of blow moulding machine	M3/MIN	1.2
Cooling water pressure	MPA	0.3
Water consumption	L/MIN	100
Machine outline size	L x W x H(M)	5.5x 2.8x 4.5
Machine weight	TON	14.5