KSA100-90L Medium Storage Blow Molding Machine | Storage Blow Molding Machine | Hollow Blow Molding Machine | Blow Molding Machine

KSA100-90L medium storage blow moulding machine Time:2019-06-05 16:12

KSA100-90L stored-type blow molding machine
KSA100-90L Technical characteristics of storage-type blow molding machine
Storage blow molding machine PLC plus man - machine interface, touch operation.Fault alarm self-diagnosis, clear at a glance.
Center feed die, eliminate the confluence line completely, and change the material and color quickly.
Moving mode adopts double linear guide and center clamping mode.Uniform force, ensure that the products cut flat.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate and stable action, energy saving.
High speed, high efficiency and low energy consumption plasticizing system, uniform and excellent mixing, ensure the purity of products.

Technical parameters of KSA100-90L medium storage blow moulding machine	UNIT	KSA100-90L
Maximum product volume	L	90
Empty circulation	PCS/H	360
Screw diameter	MM	100
Bottle Blower Screw Length-Diameter Ratio	L/D	25
Screw motor power	KW	45
Screw heating power	KW	24
Number of screw heating sections of hollow blow moulding machine	ZONE	4
Extrusion volume of HDPE	KG/H	180
Oil pump motor power	KW	22
Clamping force	KN	400
Mould opening and closing stroke	MM	550-1250
Template size	W x H(MM)	1000x 1350
Maximum die diameter	MM	430
Storage capacity	L	12
Die Heating Power	KW	20
Number of heating sections	ZONE	4
Blowing pressure	MPA	0.8
Gas consumption	M3/MIN	1.2
Cooling Water Pressure of Bottle Blower	MPA	0.3
Water consumption	L/MIN	100
Machine outline size	L x W x H(M)	5.35x 2.8x4.5
Machine weight	TON	14.5

上一篇：KSC90-60L hollow blow molding machine 下一篇：KSA80-30L medium storage blow moulding machine